Response surface optimization, purification, characterization and short-chain chitooligosaccharides production from an acidic, thermostable chitinase from Thermomyces dupontii.

Chitin, recovered in huge amounts from coastal waste, may biocatalytically valorized for utilization in food and biotech sectors. Conventional chemical-based conversion makes use of significant volumes of hazardous acid and alkali. Alternatively, enzymes offer better process control and generation of homogeneous products. Process variables were derived to achieve augmented levels of chitinase (3.8809 Ul-1 h-1) productivity from a novel thermophilic fungal strain Thermomyces dupontii, ITCC 9104 following incubation (96 h, 45 °C). An acidic thermostable chitinase TdChiT having molecular mass of 60 kDa has been purified. Optimal TdChiT activity has been demonstrated at 70 °C and pH 5. Notably decreased activity over a broad range of temperature and pH was observed following deglycosylation. Half-life, activation energy, Gibbs free energy, enthalpy and entropy for denaturation of TdChiT at its optimum temperature were 197.40 min, 105.48 kJ mol-1, 100.59 kJ mol-1, 102.64 kJ mol-1 and 5.95 J mol-1 K-1. TdChiT has specificity towards colloidal chitin and (GlcNAc)2-4. Metal ions viz. Mn2+, Ca2+ and Co2+ and nonionic surfactants notably enhanced chitinase activity. Thin layer chromatography analysis has revealed effective hydrolysis of colloidal chitin and (GlcNAc)2-4. TdChiT may potentially be employed for design of better, eco-friendly and less resource-intensive industrial procedures for upcycling of crustacean waste into value-added organonitrogens.

Food-Energy-Water Nexus in compliance with Sustainable Development Goals for integrating and managing the core environmental verticals for sustainable energy and circular economy.

Food, energy, and water resources are intricately interconnected, and nexus provides a holistic approach for addressing these complex links to minimize inefficiencies and waste. Nexus approach and circular economy are considered as effective solutions for sustainability. Quantification of these relations is the first step towards incorporating nexus modeling which helps sustainable production and consumption. For achieving the Sustainable Development Goals, understanding and effectively managing the FEW nexus becomes imperative. With an integral performance perspective, there is a need to address the interdependencies and trade-offs among food, energy, and water systems and challenges of economic, social and environmental sustainability. The aim of this study is to provide a comprehensive analysis of the FEW nexus, identify key opportunities and challenges, and propose integrated strategies for managing these core environmental verticals sustainably. The study addresses the accomplishment of these goals through nexus approaches and outlines the need for technological advancements for shared benefits among resources, contributing to conceptual development of nexus and circular economy. The results highlight the critical importance of adopting a nexus approach to advance sustainable development goals, enhance resource efficiency, and promote synergistic solutions across food, energy, and water systems.

Enhanced production of bacterial cellulose employing banana peel as a cost-effective nutrient resource.

Bacterial cellulose (BC) is an exopolysaccharide produced by bacteria that has unusual structural features and is more refined than plant cellulose. BC has recently gained more attention in a variety of fields including biological and biomedical applications due to its excellent physiochemical properties including easy biodegradability, better water holding capacity, high tensile strength, high thermal stability, and high degree of polymerization. However, application of BC at industrial scale is still limited due to its high production cost and lesser yielding strains. The present study is an attempt to isolate and characterize a novel BC-producing bacterial strain. The bacterial strain S5 has resulted into maximum cellulose production of 4.76 ± 0.49 gL-1 (30°C, pH 7.0). The strain has been further identified as Stenotrophomonas sp. Derivation of nutritional and cultural conditions has resulted into 2.34-fold enhanced BC production (banana peel powder, peptone, tartaric acid, pH 7, 30°C). FTIR spectrum of BC revealed characteristic absorption bands which could be attributed to the O-H band, C-H stretching, C-O-C stretching band, O-H bending, and >CH2 bending, indicative of the ß-1,4 glycosidic linkages of cellulose. Thermogravimetric analysis has also revealed stability of polysaccharide backbones and characteristic weight loss points. Employment of banana peel powder has appeared as a proficient low-cost source for large-scale economic production of BC for industrial applications.

Utilization of agricultural residues for energy and resource recovery towards a sustainable environment.

Fungal pre-treatment using Pleurotus ostreatus (PO) was carried out on individual and combinations of agro-waste wheat straw (WS), rice straw (RS), and pearl millet straw (PMS) with the addition of biochar (5%,7.5% and 10%) to reduce the pre-treatment duration. Further remaining substrate known as spent mushroom substrate (SMS) was used in anaerobic digestor (AD) for estimation enhanced biomethane yield. Equal ratios of RS + WS, WS + PMS, PMS + RS, and RS + PMS + WS and biochar addition were taken for enhancing pre-treatment, PO growth and AD process. The extent of pre-treatment was recorded with the maximum lignin removal of 40.4% for RS + PMS + WS as compared to untreated counterparts and 0.5%, 2.2%, and 3.3% times more lignin removal from individual PMS, RS, and WS respectively. Addition of biochar to the substrates reduced the total pre-treatment duration by days as compared to the non-biochar substrates. Biological efficiency (BE) used for the analysis of mushroom growth varied from 51-92%. Further, the average bio-methane yield was 187 ml/gVS for SMS of PMS + WS + RS with 10% biochar indicating an increment of 83.33% from untreated SMS of PMS + WS + RS. This, higher biomethane yield was 9.35%, 22.22% and 57.14% times higher than individual SMS of PMS, RS, and WS respectively. The current study shows that biochar not only enhances the bio-methane yield but also reduces the biological pre-treatment duration and removes the dependency on one lignocellulosic biomass for energy (bio-methane) and food (mushroom) production.

Exploring GWAS and genomic prediction to improve Septoria tritici blotch resistance in wheat.

Septoria tritici blotch (STB) is a destructive foliar diseases threatening wheat grain yield. Wheat breeding for STB disease resistance has been identified as the most sustainable and environment-friendly approach. In this work, a panel of 316 winter wheat breeding lines from a commercial breeding program were evaluated for STB resistance at the seedling stage under controlled conditions followed by genome-wide association study (GWAS) and genomic prediction (GP). The study revealed a significant genotypic variation for STB seedling resistance, while disease severity scores exhibited a normal frequency distribution. Moreover, we calculated a broad-sense heritability of 0.62 for the trait. Nine single- and multi-locus GWAS models identified 24 marker-trait associations grouped into 20 quantitative trait loci (QTLs) for STB seedling-stage resistance. The seven QTLs located on chromosomes 1B, 2A, 2B, 5B (two), 7A, and 7D are reported for the first time and could potentially be novel. The GP cross-validation analysis in the RR-BLUP model estimated the genomic-estimated breeding values (GEBVs) of STB resistance with a prediction accuracy of 0.49. Meanwhile, the GWAS assisted wRR-BLUP model improved the accuracy to 0.58. The identified QTLs can be used for marker-assisted backcrossing against STB in winter wheat. Moreover, the higher prediction accuracy recorded from the GWAS-assisted GP analysis implies its power to successfully select superior candidate lines based on their GEBVs for STB resistance.

Treatment of clinical laboratory sewage using a decentralized treatment unit and risk reduction for its reuse in irrigation using hybrid disinfection.

The disinfection efficacy of standalone chlorine, UV and their combined approach (hybrid) was investigated for the coliform removal in BioKube 1 and 2 treated effluents collected from different environmental settings of clinical and domestic wastes. Chlorine and UV disinfection were applied to BioKube treated wastewater with doses from 0 to 4 mg L-1 and 0-166 mJ cm-2 respectively. Combined disinfection strategies were designed to reduce the dose of chlorine and UV and to exploit the synergistic effect of them. The culturable coliforms were enumerated in treated wastewater sample (control), immediately after (reduction), and 24 h post disinfections (regrowth) using culture media plating and colilert-18 media. Both the BioKube systems (1 and 2) were effective in achieving the strict norms of physicochemical parameters, but not following the coliform counts of treated effluent for reuse in irrigation. A hybrid strategy of chlorine followed by UV was found to be the most effective among various standalone and combination approaches for the removal of coliforms (>4 log ER or <1000 CFU/100 mL) from both the treated effluents. However, coliform present in treated effluent of BioKube 1 were resisting (regrowth) against all kind of applied disinfectants except chlorine followed by UV dose at or more than 0.5 mg L-1 + 41 mJ cm-2. Limited reports are available on hybrid disinfection approaches with decentralized packaged sewage treatment units and this study would help to adopt as an effective tertiary treatment strategy for reuse of treated sewage for irrigation while ensuring public health safety.

Insights into sustainable resource and energy recovery from leachate towards emission mitigation for environmental management: A critical approach.

The exponential generation of municipal solid waste (MSW) and landfill disposal without any treatment has increased the continuous generation of landfill leachate. Improper MSW and leachate management are contributing to environmental degradation and water and soil pollution, which must be treated. Numerous works have been conducted on leachate treatments for energy and resource recovery. This review presents a comprehensive study of leachate management in which different treatment methods are discussed to analyze the suitability of processes that can be employed to treat leachate efficiently. Further, the characteristics of leachate are examined as properties of leachate may be varied depending upon the region. Still, several challenges related to leachate management and its treatments are discussed in this study. An integrated system could be a better option for treating leachate because it contains large amounts of organic and inorganic compounds. Proper leachate management would help to recover energy and value-added products (metals).

Enhanced production of acetic acid through bioprocess optimization employing response surface methodology and artificial neural network.

In this study, acetic acid bacteria (AAB) are isolated from fruit waste and cow dung on the basis of acetic acid production potential. The AAB were identified based on halo-zones produced in the Glucose-Yeast extract-Calcium carbonate (GYC media) agar plates. In the current study, maximum acetic acid yield is reported to be 4.88 g/100 ml from the bacterial strain isolated from apple waste. With the help of RSM (Response surface methodology) tool, glucose and ethanol concentration and incubation period, as independent variable showed the significant effect of glucose concentration and incubation period and their interaction on the AA yield. A hypothetical model of artificial neural network (ANN) was also used to compare the predicted value from RSM. Acetic acid production through the biological route can be the sustainable and clean approach to utilizing food waste in circular economy approach.

Multifaceted production strategies and applications of glucosamine: a comprehensive review.

Glucosamine (GlcN) and its derivatives are in high demand and used in various applications such as food, a precursor for the biochemical synthesis of fuels and chemicals, drug delivery, cosmetics, and supplements. The vast number of applications attributed to GlcN has raised its demand, and there is a growing emphasis on developing production methods that are sustainable and economical. Several: physical, chemical, enzymatic, microbial fermentation, recombinant processing methods, and their combinations have been reported to produce GlcN from chitin and chitosan available from different sources, such as animals, plants, and fungi. In addition, genetic manipulation of certain organisms has significantly improved the quality and yield of GlcN compared to conventional processing methods. This review will summarize the chitin and chitosan-degrading enzymes found in various organisms and the expression systems that are widely used to produce GlcN. Furthermore, new developments and methods, including genetic and metabolic engineering of Escherichia coli and Bacillus subtilis to produce high titers of GlcN and GlcNAc will be reviewed. Moreover, other sources of glucosamine production viz. starch and inorganic ammonia will also be discussed. Finally, the conversion of GlcN to fuels and chemicals using catalytic and biochemical conversion will be discussed.

Microbial fuel cells for waste nutrients minimization: Recent process technologies and inputs of electrochemical active microbial system.

Still, in the current period, non-renewable energy sources have contributed to fulfill the current energy requirement and it causes the deficit of available stocks with emission of pollutant byproducts components. In recent years, efforts were made to harness the sustainable/ renewable fuels from renewable sources/ waste, complex organic matters including biomass at global level. Researchers have put attention on harnessing energy from wastewater and MFCs systems. This MFC approach utilizes the wastewater as feed/ carbon sources to generate bioenergy such as bio- hydrogen and electricity in a sustainable and efficient way via completing the wastewater treatment. This approach consists of anode and cathode electrodes with proton exchange membrane (PEM). Microbial fuel cells are utilized with other effective approaches (anaerobic digestion/ fermentation, local demand-based-MFC approach) that are applied to utilize biowastes for microbial cell growth and electron emission. This review discusses the recent and technologically advanced approach such as microbial fuel cells (MFCs). MFCs can apply to fulfill the increasing trends of global energy demand, found with more utilization in home appliances in urban areas, industrial tasks and transportation sectors. Last few decades, there have been recent modifications in MFCs configurations and design that have improved performance of MFCs. Recent design and configuration of MFCs have shown the removal of maximum chemical oxygen demand (up to 94-97%) with generation maximum current output (up to 5.23 mA) from wastewater. This review presents a comprehensive collection of recent information about technologies and design of MFCs with implementation of microbial electrogene with development of wastewater treatment having sustainable fuel/ energy generation at an effective level.

Antibiotic resistance genes and bacterial diversity: A comparative molecular study of treated sewage from different origins and their impact on irrigated soils.

Present study aims to investigate how is soil affected following irrigation with treated effluents of different origins by analysing the bacterial diversity, metabolic diversity and antibiotic resistance genes (ARGs). Comparative analysis with previously reported ARGs in effluents was performed to understand the mobility of ARGs from treated wastewater to the irrigated soil with respect to the control soil regimen. Acinetobacter, Burkholderia and Pseudomonas were observed as the most abundant genera in all the samples. The metabolic gene abundance of all the samples suggests a prominent contribution to natural mineral recycling. Most abundant ARGs observed encode resistance for clindamycin, kanamycin A, macrolides, paromomycin, spectinomycin and tetracycline. Treated effluent reuse did not appear to enhance the ARG levels in soils in most cases except for institutional treatment site (M), where the ARGs for aminoglycosides, ß-lactams and sulfonamides were found to be abundantly present in both treated effluent and the irrigated soil. This study finds the importance of wastewater treatment from different origins and the impact of treated wastewater reuse in irrigation. This study also emphasises on the better understanding of ARGs mobility from water to soil.

A Detached Leaf Assay for Rapidly Screening Plant Pathogen-Biological Control Agents.

The detached leaf assay (DLA) is a nondestructive method for evaluating interactions between plants and disease-causing agents that allows quick characterization of potential pathogens' infectivity and plants' resistance to them. Here we show its utility for also assessing potential biological control agents (BCAs), by demonstrating its applicability for screening potential BCAs for the strawberry (Fragaria × ananassa) pathogen Phytophtora cactorum.

Integrated system of anaerobic digestion and pyrolysis for valorization of agricultural and food waste towards circular bioeconomy: Review.

Agricultural and food waste have become major issue affecting the environment and climate owing to growing population. However, such wastes have potential to produce renewable fuels which will help to meet energy demands. Numerous valorization pathways like anaerobic digestion, pyrolysis, composting and landfilling have been employed for treating such wastes. However, it requires integrated system that could utilize waste and promote circular bioeconomy. This review explores integration of anaerobic digestion and pyrolysis for treating agricultural and food waste. Proposed system examines the production of biochar and pyro-oil by pyrolysis of digestate. The use of this biochar for stabilizing anaerobic digestion process, biogas purification and soil amendment will promote the circular bioeconomy. Kinetic models and framework of techno-economic analysis of system were discussed and knowledge gaps have been identified for future research. This system will provide sustainable approach and offer carbon capture and storage in form of biochar in soil.

Sustainable utilization of pineapple wastes for production of bioenergy, biochemicals and value-added products: A review.

Agricultural residues play a pivotal role in meeting the growing energy and bulk chemicals demand and food security of society. There is global concern about the utilization of fossil-based fuels and chemicals which create serious environmental problems. Biobased sustainable fuels can afford energy and fuels for future generations. Agro-industrial waste materials can act as the alternative way for generating bioenergy and biochemicals strengthening low carbon economy. Processing of pineapple generates about 60% of the weight of the original pineapple fruit in the form of peel, core, crown end, and pomace that can be converted into bioenergy sources like bioethanol, biobutanol, biohydrogen, and biomethane along with animal feed and vermicompost as described in this paper. This paper also explains about bioconversion process towards the production of various value-added products such as phenolic anti-oxidants, bromelain enzyme, phenolic flavour compounds, organic acids, and animal feed towards bioeconomy.

Reprint of Organic waste conversion through anaerobic digestion: A critical insight into the metabolic pathways and microbial interactions.

Anaerobic digestion is a promising method for energy recovery through conversion of organic waste to biogas and other industrial valuables. However, to tap the full potential of anaerobic digestion, deciphering the microbial metabolic pathway activities and their underlying bioenergetics is required. In addition, the behavior of organisms in consortia along with the analytical abilities to kinetically measure their metabolic interactions will allow rational optimization of the process. This review aims to explore the metabolic bottlenecks of the microbial communities adopting latest advances of profiling and 13C tracer-based analysis using state of the art analytical platforms (GC, GC-MS, LC-MS, NMR). The review summarizes the phases of anaerobic digestion, the role of microbial communities, key process parameters of significance, syntrophic microbial interactions and the bottlenecks that are critical for optimal bioenergetics and enhanced production of valuables. Considerations into the designing of efficient synthetic microbial communities as well as the latest advances in capturing their metabolic cross talk will be highlighted. The review further explores how the presence of additives and inhibiting factors affect the metabolic pathways. The critical insight into the reaction mechanism covered in this review may be helpful to optimize and upgrade the anaerobic digestion system.

Organic waste conversion through anaerobic digestion: A critical insight into the metabolic pathways and microbial interactions.

Anaerobic digestion is a promising method for energy recovery through conversion of organic waste to biogas and other industrial valuables. However, to tap the full potential of anaerobic digestion, deciphering the microbial metabolic pathway activities and their underlying bioenergetics is required. In addition, the behavior of organisms in consortia along with the analytical abilities to kinetically measure their metabolic interactions will allow rational optimization of the process. This review aims to explore the metabolic bottlenecks of the microbial communities adopting latest advances of profiling and 13C tracer-based analysis using state of the art analytical platforms (GC, GC-MS, LC-MS, NMR). The review summarizes the phases of anaerobic digestion, the role of microbial communities, key process parameters of significance, syntrophic microbial interactions and the bottlenecks that are critical for optimal bioenergetics and enhanced production of valuables. Considerations into the designing of efficient synthetic microbial communities as well as the latest advances in capturing their metabolic cross talk will be highlighted. The review further explores how the presence of additives and inhibiting factors affect the metabolic pathways. The critical insight into the reaction mechanism covered in this review may be helpful to optimize and upgrade the anaerobic digestion system.

Bioengineered bioreactors: a review on enhancing biomethane and biohydrogen production by CFD modeling.

Computational fluid dynamics (CFD) is numerical strategy developed for simulating the behavior of liquid and gas flow. CFD may be applied starting from aerospace, engine design, vehicle aerodynamics, power plants and chemical industries for analyzing and solving relevant system design and process issues. Biogas produced during anaerobic digestion (AD) is sustainable and renewable alternative to fossil fuels. AD may improve the controlled production of biogas and offers significant environmental benefits. This review focuses on research outcomes relevant for enhanced biogas production by exploring the possible applications of CFD in AD technology. CFD-related research performed in AD conditions in order to improve mixing performance, reduce power consumption, and understand the effects of total solid (TS) concentrations on flow behavior have been discussed. In addition, the use of AD for bio-hydrogen production, wastewater treatment, and sludge treatment are looked in. This review also identifies novel areas for AD technology advancement where there is potential for economic improvement in renewable energy production. Finally, future research needs have been identified, focusing on the opportunities to integrate conceptual and mathematical models for advancing CFD simulations for bioenergy.

RNA Interference and CRISPR/Cas Gene Editing for Crop Improvement: Paradigm Shift towards Sustainable Agriculture.

With the rapid population growth, there is an urgent need for innovative crop improvement approaches to meet the increasing demand for food. Classical crop improvement approaches involve, however, a backbreaking process that cannot equipoise with increasing crop demand. RNA-based approaches i.e., RNAi-mediated gene regulation and the site-specific nuclease-based CRISPR/Cas9 system for gene editing has made advances in the efficient targeted modification in many crops for the higher yield and resistance to diseases and different stresses. In functional genomics, RNA interference (RNAi) is a propitious gene regulatory approach that plays a significant role in crop improvement by permitting the downregulation of gene expression by small molecules of interfering RNA without affecting the expression of other genes. Gene editing technologies viz. the clustered regularly interspaced short palindromic repeat (CRISPR)/CRISPR-associated protein (CRISPR/Cas) have appeared prominently as a powerful tool for precise targeted modification of nearly all crops' genome sequences to generate variation and accelerate breeding efforts. In this regard, the review highlights the diverse roles and applications of RNAi and CRISPR/Cas9 system as powerful technologies to improve agronomically important plants to enhance crop yields and increase tolerance to environmental stress (biotic or abiotic). Ultimately, these technologies can prove to be important in view of global food security and sustainable agriculture.

Enhancing hydrolysis and syntropy simultaneously in solid state anaerobic digestion: Digester performance and techno-economic evaluation.

The present study investigated the effect of alkali and biochar addition for simultaneous increment of hydrolysis and syntropy for higher methane yield from pearl millet straw (PMS) in solid state anaerobic digestion. A taguchi based design of experiment was coupled with grey relation analysis for multiple output optimization. Study showed that 0.5 g (g/100 g PMS) of alkali and 10 g/L of biochar was the optimised dosing. Statistically, contribution of biochar and alkali was 48 and 21% respectively on the multiple output. The confirmation test revealed that hydrolysis rate constant, k and total volatile fatty acid/alkalinity ratio for reactor having optimised conditions was 0.0521 d-1 and 0.36 while for control, it was 0.0595 d-1 and 0.76 respectively. Techno-economic assessment showed US$ 25,652 of net present value and 11.29% of internal rate of return. Sensitivity analysis showed that capital expenditure and methane yield was most sensitive to net present value.